Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders

$26.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible

$85.99
The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers.
- Rear fender expands for custom fit
- Rubber fasteners mount to a variety of frame styles

$37.99
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 26-inch and 27.5-inch wheel compatible

$37.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 27.5+ and 29-inch wheel compatible

$24.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

$22.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

$20.00
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel.
- Especially helpful for fender mounting on suspension-corrected forks
- Threaded M6 holes at 10mm intervals for fine-tuning fit
- Bolts and lock washers included

$26.99
Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.

$24.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

$34.99
Front Fender:
• Front fender made of durable all-weather polymer
• Mounts to most suspension and rigid forks
• Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID)
• Extra-wide profile for 3-5" wide tires
Rear Fender:
• Minimalist seat post fender made of durable all-weather polymer material
• Quick-release mount snaps on and off in seconds
• Wide profile design
• Features an adjustable fender angle to fit most bikes
• Extra wide profile to fit 3-5" tires

$19.95
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

$16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use.
- Length: 370mm (14.5")
- Weight: 60g (2.1oz)

$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$27.95
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

$57.75
- Safety release clips detach passively when an object becomes lodged
- Length-adjustable struts and strut slots for perfect positioning and tire clearance
- Designed for use on disc brake bikes with thru-axles
- Compatible Giant Bike Model: Defy / Defy Adv/ Avail Adv / Contend AR/ Contend SL
- Compatible Wheel Size: 38 version: 700*32c (Tire width: <320mm), 45 version: 700*32c~700*42c (Tire width: 320mm~420mm)

$72.99
- Color: Black
- Maximum Tire Width: 35 mm
- Fender Width: 45 mm
- Wheel Size: 700c
- Material: Aluminum
- Requires Eyelets?: Yes

$50.00
- Designed for compatibility with the Giant Defy Aluxx and Liv Avail Aluxx bikes
- Quickly adjust gap between fender and tire
- Tool-Free universal mounting system
- Full coverage protection

$12.56 - $15.08
- Attaches to saddle rails
- Quick and easy to install and remove
- Fat Butt, a wider version for fatbike applications
- Road/CX narrower for road and cross bike applications

$64.99
End wet feet forever! SKS Longboard are one of the longest and best coverage fenders on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety.
- 700c x 38–45

$34.95
Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender RC1/RC11 fender set. They utilize a unique quick-release mounting system that makes installation a snap and they're made from tough, yet light polycarbonate with stainless steel struts for stiffness and durability. The front fender has a clever feature: it automatically disengages if a large object enters the wheel. The underside is highly polished so grime doesn't stick and, they accommodate tires up to 700 x 25c in size.

$24.99
Easy-to-install rear fender for your fat bike.
CONSTRUCTION
• Virtually unbreakable polypropylene body
MOUNTING SYSTEM
• Adjustable rubber straps mount to down tube
• 100% recyclable
• Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket
• Hardware included
• Weight: 190 grams / 6.7 ounces

$56.00
Giant's Speedshield Tour fenders are a simple, lightweight way to fend off muck and grime. All-weather polycarbonate construction offers years of reliable service, and the adjustable stainless steel hardware is stable and easy to install.

$89.99 - $119.99
- Rugged 6061 aluminum construction is corrosion resistant
- 100mm mudflaps provide ultimate coverage and are double-riveted for durability
- Hardware is all stainless-steel and pre-installed for hassle-free mounting
- V-stays for added stability
- Disc brake compatible
- 50mm width
- Release Tabs on front fender for added safety
- Meets EN test standards

$16.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

$54.95
Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

$13.00
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.

$21.00
Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too!
- City width: 48 mm at tail
- Mountain width: 64 mm at tail

$16.99
- Lightest and most versatile MTB mudguard available
- Uses hook and loop Velcro straps to attach to the bridge and lower legs
- Compatible with forward and double bridge fork designs and all wheel sizes
- XL version is longer and provides more coverage

$15.00
These clip-on fenders are designed specifically for fat bikes. They're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure.
- Extra-long and wide to accommodate the biggest tires
- Easy to install and fits virtually any bicycle
- Works with both rigid and suspension forks

$59.99
A sturdy, secure and highly visible set of full-coverage fenders designed to fit more bikes than any other full-coverage fender. Easy to install and easy to adjust, Rainrunners are a perfect way to install fenders on bikes that are not designed to accept fenders. These fenders are easily mountable with either O-rings or the included zip ties, and are compatible with most disc brake-equipped bikes.
Weight 575 g / 1.26 lbs (pair)
Mounting system
- Below: Mount on frame or fork via included Frame-Runners
- Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Construction
- Alloy/Engineering plastic FRAME-RUNNER mounts
- 360 degree visibility 3M Reflex sides
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
Added Benefit
- Included FRAME-RUNNERS mount to almost any frame or fork to ‘create’ eyelets
- FRAME-RUNNERS can be installed and removed easily via included O-rings, or permanently mounted using included zip-ties
- 3M Reflex side panels offer 360 degrees of reflective visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Extended mudflaps keep feet dry and reduce rear spray
- Sold pre-assembled for quick mounting
- Compatible with most disc-brake-equipped bikes
Page 1 of 6
Next page