Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$7.00
Zipp Speed Weaponry Valve Extender Wrench Set
- Two 4 mm and 5 mm combination wrenches
- Replacement wrenches required to properly install Zipp integrated valve extenders
- Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

$47.00
Your riding doesn’t need to stop when the weather gets cold.
Features
- Giant road thru-axle trainer axle
- Alloy construction
- For use on 2017+ Giant road bikes with a 142x12mm rear thru-axle

$14.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

$19.99
Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks.
-Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs
-100 mm front hub spacing only
-CNC-machined AL-6061

$2.99
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

$7.99
Replacement freehub spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- 3 hooks for affixing to spokes

$119.99
- 6 pawl full engagement/27 point/13.3-degree engagement
- Cassette bodies for Elite Series CX/GX/MT/FB-1110 hubs
- Sealed bearings

$119.99
- 6 pawl/54 point/6.6-degree engagement
- Cassette bodies for Elite Series CX/GX/MT/FB-1110 hubs
- Sealed bearings

$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.

$70.00
The Drive Thru is a dummy hub or chain keeper that replaces your wheel while cleaning the chain. It is a fast and effective way to clean your chain between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. Installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great for packing the bike for transport.
*This Drive Thru Value Meal includes three dummy axles with 1.0, 1.5 and 1.75 thread pitches and one pulley.
- Value Meal includes 1.0, 1.5, and 1.75mm thread pitch dummy axles.
- All Drive Thru dummy axles are 12mm in diameter.
- Dummy axles are precision machined from 7075 aluminum and knurled for easy grip.
- Pulleys are machined from durable Delrin.
- Oil and solvent resistant O-rings
- Lead-in threads designed for quick insertion into the frame
- Simple, one-handed installation (no tools required)

$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

$21.99
• 5mm skewer set (F+R hubs)
• Standard 5mm Hex release
• Black or Silver anodized finish
• Chromoly axles

$22.99
- Elite Series skewers for road, cyclocross, gravel, and MTB applications
- AL6061 alloy lever with CrMo axle
- Available for 100mm, 130mm, and 135mm OLD spacing
- Spacing / Axle: QR
- Wt: 53g

$69.90
These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.

$7.99
- Plastic spoke covers in a variety of colors
- 300mm cut to fit length
- 36 pieces - enough for one wheel
- Increases visibility and demands attention

$23.99
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install

$4.99 - $6.99
14-gauge spoke nipples made from durable brass material for a perfectly laced wheel.
Product Specifications
- Material: Brass
- Gauge: 14g
- Length: 16mm (5/8")
- Quantity: 40pc per pack
- Weight: 2oz per pack

$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable

$40.00
Ultra-light, bolt-on thru-axles, with a low-profile 6mm head for use on Whisky forks and others. They are also available in some common rear frame sizes. See manufacturer's specifications for fitment questions.
- Thread Length: 12mm
Page 1 of 15
Next page