Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$14.99
Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.
$5.00
The Enduro contact silicone seal is the same new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for SRAM DUB cranksets
- Contact face seal seals directly to the bearing OD to make it a more universal fit
- Apply a thin film of grease on the back side of the seal for optimum seal performance
$10.00
This pair of 14" long extenders attaches the Old Man Mountain rack frame to the rear of your bike. The extenders have a slot for adjustability, which allows you to level the rack on different types of bikes. Includes hardware.
- 14" length
- Includes slots for adjustability
- Made from 6061 aluminum and powder coated matte black for finish and durability
- Can be mounted to eyelets or to the Old Man Mountain pucks if your bike does not have eyelets
- May need to be bent to fit width of frame
- Includes hardware
$20.00
This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame.
- Alloy construction
- Replacement derailleur hanger sold separately (Part Number DP0814)
- Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames
$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included.
- Aluminum hatch cover with stainless screws
- All necessary screws and plates included
$34.95 - $94.95
Replacement frame parts and hinge clamps for Ritchey Break-Away frames.
- 34.9mm compatible with Ti-Carbon Road - Titanium Cross (all years) - Steel Break-Away frames (2012 and newer)
- 31.8mm compatible with Steel Road and CX Break-Away bikes prior to 2012 models
- 41.5mm compatible with Break-Away Carbon Road frame
- 45.0mm compatible with Break-Away Tandem
$7.71
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$39.99
Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.
$35.00
Featuring a universal design that allows the switch from a bolt to QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it.
- CNC-machined aluminum lever and clamp
- Brass cam allows increased durability clamping force
- Laser-etched logos
$26.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
$135.99
Shimano Di2 External Battery Mounts
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
$16.00
Shimanno Deore XT RD-M786-SGS Rear Derailleur Outer Cage Plate
- "B" fit for SLX RD-M675-SGS, Deore RD-M615-SGS
- OEM outer cage plate for XT RD-M786-SGS
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever
$54.00
Brake lever blades are easy to bend or break, but their sacrifice saves the more expensive parts of your brake system, which is a good thing! Shimano Hydraulic Disc Brake Lever Blades can be used on either the left or right lever, and these are for XTR 9020 brakes.
$11.00
- Width: 5.8 mm
- Drivetrain Speeds: 11
- Color: Silver
- Reusable: No
$123.99
- Internal junction-A with two e-Tube ports
- Externally facing charging port eases charging, especially for internal batteries
- Mounts in road bar end or in frames with an integrated mounting point
- For easier cable routing, use along with EW-JC130 three-way e-Tube cable
$4.00
Shimano Y8H298040 SM-BH59 Olive and connecting insert
$30.99 - $61.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade.
- Slick-Lube lined housing reduces friction for faster cable movement and better braking response
- High carbon internal steel coil for improved stiffness
- Appropriate for Teflon coated cables as well as steel and galvanized
- Length: 10m
$64.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel.
- KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner
- Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes
- 20 black alloy lined end caps, 10 black POP end caps included
$23.99
• Quick-release seatpost clamp
• Full stainless-steel construction
• Rubber-covered handle for a great grip
$11.99 - $12.99
• Forged aluminum seat clamp
• Chromoly integrated QR seat binder bolt
• Increased durability and clamping force
$9.95 - $9.99
• Quick-release seatpost clamp
• Chrome-plated chromoly
• Rubber-covered handle for a great grip
$14.99 - $17.99
- Stainless steel button head bolts
- Sold in bags of 10
$4.99
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$3.41
Flat head screws from Wheels Manufacturing.
$21.00
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$27.99
- Superior sealing performance across a wide range of aftermarket applications
- Integrated dust sealing lip is designed to guard against dirt and water entering fork preventing contamination and increasing performance
- Integrated oil sealing lip preve